2 TECHNICAL DATA
TECHNICAL DATA
A Above dimensions are based on the machine with KUBOTA original bucket and 2100 arm.
A Specifications subject to change without notice.
D With unloaded digging bucket.
D Firm compacted soil.
D Operators must exercise extra caution and follow instructions in the operator's manual.
D Worse condition or heavier attachment to the above will decrease climbing angle.
KUBOTA EXCAVATOR
Model name KX080-4
Type Cabin Angle Blade Type Cabin
Operating weight
(including operator's weight)
kg(lbs.)
Rubber tracks
Steel tracks
(450 width)
Steel tracks
(600 width)
Rubber tracks
Steel tracks
(450 width)
8290 (18280) 8340 (18390) 8470 (18670) 8680 (19140) 8730 (19250)
Engine
Type Water cooled 4 cycle diesel engine with 4 cylinder
Model name KUBOTA V3307-CR-TE4
Total displacement cc(cu.in) 3331 (203.3)
Engine
power
SAE gross
kW(Hp)
49.7 (66.6)
SAE net
kW(Hp)
46.5 (62.3)
Rated speed rpm 2000
Low idling speed rpm 1000
Performance
Unit swing speed rpm 9.5
Travel
speed
Fast km/h(mph) 4.9 (3.1)
Slow km/h(mph) 2.7 (1.7)
Ground kPa
pressure (kgf/ )
(With operator) [psi]
36.0
(0.367)
[5.23]
36.9
(0.376)
[5.35]
28.1
(0.287)
[4.08]
37.7
(0.385)
[5.47]
38.6
(0.394)
[5.60]
Climbing angle %(deg) *36 (20)
Angle in case of
crossing slope %(deg)
*27 (15)
Dozer
Width x Height mm(in.) 2200 x 500 (86.6 x 19.7) 2200 x 510 (86.6 x 20.1)
Max
swing
Left rad(deg) - 0.44 (25)
Right rad(deg) - 0.44 (25)
Boom swing angle
Left rad(deg) 1.22 (70)
Right rad(deg) 1.05 (60)
Pressure
connection
for
attachments
Max.displacement
(Theoretical)
L(US gal)/ min
100 (26.4)
Max. pressure Mpa
(kgf/ )
[psi]
20.6
(210)
[2987]
Fuel tank capacity L(US gal) 115 (30.4)
To Next Page
Loading...
