Kubota KX080-4 - Hydraulic Oil Change (Including Replacing of the Suction Filter in the Hydraulic Tank)

59MAINTENANCE
MAINTENANCE
MAINTENANCE INTERVALS
No. Check points Measures
Hour meter indicator
Intervals
Ref.
page
50 100 150 200 250 300 350 400 450
1 Coolant
check Daily check 66
change every 2 years 87
2 Fuel check Daily check 67
3 Engine oil
check Daily check 67
change every 500 hrs 80
4 Hydraulic oil
check Daily check 68
change every 1000 hrs 83
5
Grease front
attachments
Bucket and bucket
link pin / Dozer
angle pin and
angle cylinder boss
- Daily check 70
Boom swing
fulcrum
- every 100 hrs 74
Others - every 250 hrs 79
6 Radiator and oil cooler check Daily check 69
7 Washer liquid check Daily check 69
8 Engine and electrical wiring check Daily check 69
9 Water separator drain every 50 hrs 71
10 Fuel tank drain every 50 hrs 71
11 Battery condition check every 50 hrs 72
12 Greasing swing bearing teeth - every 50 hrs 73
13 V-belt tension
check Daily check 68
adjust every 200 hrs 74
14 Radiator hoses and clamps
check every 200 hrs 76
replace every 2 years 86
15
Air filter
element
Outer element
clean every 200 hrs 76 *2
@
replace every 1000 hrs 84 *2
Inner element replace every 1000 hrs 84 *2
16 Greasing swing ball bearing - every 200 hrs 76
17 Fuel filter cartridge replace every 500 hrs 81 @
18 Engine oil filter replace every 500 hrs 80
19 Drive unit oil change every 500 hrs 81
20 Hydraulic return filter cartridge replace every 500 hrs 82
21 Hydraulic suction filter element replace every 1000 hrs 83 *4
22 Filter in the pilot hydraulic system replace every 1000 hrs 81 *4
23 Injector tip check every 1500 hrs 85 *4
24 Oil separator element replace every 1500 hrs 85 *4
25 EGR cooler check every 1500 hrs 85 *4