117OPERATING THE TRACTOR
C Setting the traveling speed range in the road mode
[Premium model]
1. Referring to the traveling speed chart, determine
maximum and minimum traveling speeds that are best
suited for the type of work. On the K-monitor screen,
enter desired traveling speeds.
2. The automatic gear shifting will be within the preset
traveling speed range.
For detailed settings, refer to "Setting the Engine/
Transmission" in "K-MONITOR" in "INTELLIPANEL(TM)
CONTROL" section.
A Suppose that while the machine is running, the
traveling speed is increased or decreased out of its
preset range with the ez-command center. When this
happens, the manual mode is resumed. To go back to
the auto shift mode, get the traveling speed back into
the preset range and press the auto shift button again.
C Setting the main gear shift range in the field mode
[Premium model]
1. Referring to the traveling speed chart, determine
maximum and minimum main gear shifts that are best
suited for the type of work. On the K-monitor screen,
enter a desired main gear shift range.
2. The automatic gear shifting will be within the preset
main gear shift range.
For detailed settings, refer to "Setting the Engine/
Transmission" in "K-MONITOR" in "INTELLIPANEL(TM)
CONTROL" section.
A The automatic gear shift range in the field mode may
be preset only for the main gear shift.
A Suppose that while the machine is running, the
traveling speed is increased or decreased out of its
preset range with the ez-command center. When this
happens, the manual mode is resumed. To go back to
the auto shift mode, get the traveling speed back into
the preset range and press the auto shift button again.
(1) Selected traveling speed gear shift
(2) Previous screen resume switch
(3) Low-speed slider
(4) High-speed slider
(5) High-speed setting switch
(6) Low-speed setting switch
(7) Main gear shift section
(8) Range gear shift section
(1) Selected traveling speed gear shift
(2) Previous screen resume switch
(3) Low-speed setting switch
(4) High-speed setting switch
(5) High-speed slider
(6) Low-speed slider
(7) Main gear shift section (1 to 4)
To Next Page
