4. - Safety
FC302G - FC302GI - FC352G
17
KN270BGB_F
Mower conditioner
Gross weight and weight per axle
Transport position
Lights and indicators
Respect the tractor gross weight, its lift capacity or
the permissible maximum load on the attachment
and the maximum load per axle.
The front axle load (1) must never, under any
circumstances, be less than 20% of the tractor's
unladen weight. If necessary, add ballast weights to
the front or to the rear to preserve the steering and
braking efficiency.
Do not exceed the gross machine weight rating or
the maximum machine axle load allowed.
For machines with hoppers or tanks:
- If the total weight exceeds the machine's total gross weight, empty the hopper to travel on
public roads.
- In any case, we recommend to travel on public roads with empty hoppers and tanks.
Before transporting the machine on public roads, place the machine into its transport position, according to
the instructions in this manual.
Before transporting the machine on public roads,
ensure that all legally required lightings and
signallings are in place.
Ensure that lightings and signallings are clean and
in good working order. Replace any missing or
broken equipment.
- Always obey current regulations for
driving on roads.
To Next Page
Loading...
