KUHN FC302G - Storage; At the End of each Season

10. - Maintenance and storage
FC302G - FC302GI - FC352G
93
KN270BGB_F
Mower conditioner
10.4 Storage
10.4.1 At the end of each season
- Clean the machine thoroughly.
- Drain all gearboxes and cutterbar and refill with
new oil (see "Lubrication" chapter).
- Touch up any areas of damaged paintwork.
- Put the machine under cover in a dry place.
- Inspect and replace worn knives and bolts (See
section: Inspection of knives and securing
elements).
- Inspect and replace worn or damaged fingers on
the conditioning rotor.
- Slacken V-belts and check their condition.
- Depressurize all hydraulic functions.
- Grease the cylinder rods in contact with the
outside.
A7300019 0