KUHN FC302G - Intermediate PTO Shaft

FC302G - FC302GI - FC352G
40
6. - Putting into service
KN270BGB_F
Mower conditioner
6.2.8 Intermediate PTO shaft
 Friction slip clutch
The secondary PTO transmission shaft is fitted with
a friction slip clutch.
Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
Before the machine is put into service and
after a long period of non-use, check the
function of slip clutch to ensure it is not
locked up.
- Uncouple secondary pto shaft on the bevel
gearbox side.