FC302G - FC302GI - FC352G
58
8. - Instructions for work
KN270BGB_F
Mower conditioner
8.2.4 Belt tension
Adjusting the tension:
Check that belt tension as from the first hour
of use.
The belt should not deflect more than 10 mm
(0.40’’).
Never replace belts individually.
Replace belts in full sets.
FC302G - FC302GI:
- Tighten screw (1) to tension belts.
- Loosen nut (1) to slacken belts.
FC352G:
- Remove belt guard (2).
- Tighten screw (1) to tension belts.
- Loosen nut (1) to slacken belts.
- Reinstall the belt guard (2).
Af the end of each season: Release belt
tension.
To Next Page
Loading...
