KUHN FC302G - Instructions for Transport; Putting the Machine into Transport Position

7. - Instructions for transport
FC302G - FC302GI - FC352G
45
KN270BGB_F
Mower conditioner
7. Instructions for transport
7.1 Putting the machine into
transport position
From the working position:
Before placing the machine into transport
position:
- Wait until the rotating parts have come to a
complete stop.
- Check that nobody is within the machine
pivoting area.
- If there is someone, make sure the person
moves away.
- Operate drawbar shift cylinder to put the drawbar
in transport position.
- Shut-off drawbar shift cylinder lock valve (1).
- Fit safety bar (2).
- Reinstall R-clip (3).
1
3
2