KUHN FC302G - Putting into Service; Description of Control Elements; Coupling and Uncoupling; Description of Coupling Elements

FC302G - FC302GI - FC352G
32
6. - Putting into service
KN270BGB_F
Mower conditioner
6. Putting into service
6.1 Description of control elements
6.2 Coupling and uncoupling
6.2.1 Description of coupling elements
The machine is supplied with an 18 mm box wrench
(1) to carry out certain adjustment and maintenance
tasks.
1
• A PTO shaft 1 3/8’’ - 6 splines.
• A hose that controls the mowing unit
raising/lowering.
• Two hydraulic hoses controlling the drawbar shift
cylinder.
• An electric 7-pin plug for the signalling
equipment.