KUHN FC302G - Intermediate PTO Transmission Shaft with Constant Velocity Joint; Lubrication

FC302G - FC302GI - FC352G
68
9. - Optional equipment
KN270BGB_F
Mower conditioner
9.7 Intermediate PTO transmission
shaft with constant velocity joint
The constant velocity PTO shaft can work at greater
angles than the standard PTO shaft.
Before using this equipment, read manual supplied
with the PTO.
9.7.1 Lubrication
 Intermediate PTO shaft
- Every 8 hours:
• universal joints (1).
- Every 20 hours:
• transmission tube (2).
- Every 40 hours:
• Guide rings (3).
• constant velocity joint (4).
• Guard guides (5).
Grease the constant velocity joint when the shaft
is straight.
3
2
1 1
4
5