EasyManua.ls Logo

KUHN FC302G - Preparing the Tractor

KUHN FC302G
104 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6. - Putting into service
FC302G - FC302GI - FC352G
33
KN270BGB_F
Mower conditioner
6.2.2 Preparing the tractor
The machine adapts to tractors fitted with a 2-point
hitch coupler category 2 or 3.
Select the tractor speed of 540/min.
or
Select the tractor speed of 1000/min.
The tractor PTO must rotate at a speed of 540 or
1000 rpm.
The tractor must be equipped with:
- 1 double acting hydraulic outlet.
- 1 single acting hydraulic outlet.
Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not exceeded:
See section:
- Safety / Safety instructions /
Precautions when driving on public
roads.
M1
abcd
T
1
T2
M2
The tractor must be fitted with lower link
stabilizers.
Hitch pin parallelism
- Adjust tractor lift rods so that hitch pins are parallel
to the ground.
A
A

Table of Contents

Related product manuals