KUHN FC302G - Lubrication

FC302G - FC302GI - FC352G
72
10. - Maintenance and storage
KN270BGB_F
Mower conditioner
10.2 Lubrication
Grease:
- The Gyrodine gearbox
- The drawbar pivot pin
- The belt tensioner housing
-Link rods
- Wheel arms
- The conditioning comb housing

Every 8 hours
After the first 10 hours
of use
Every 200 hours or at
the end of the season
Except for the secondary PTO shaft lubrication, the
machine must be placed in transport position for all
maintenance operations (knife replacement,
lubrication, etc).
- Clean grease nipples before greasing.
Lubricate with multi-purpose grease grade
NLGI 2