8. - Instructions for work
FC302G - FC302GI - FC352G
55
KN270BGB_F
Mower conditioner
8.2.3 Finger conditioning rotor speed
The machine is equipped with a finger conditioning
rotor. At delivery, the speed is set at 1000 rpm.
The rotor speed can be adjusted to 1000 min-1 or
810 min-1.
Rotor speed adjustment
In case an obstacle has been struck, check
that the mowing unit has not been damaged.
Always place the machine in working
position before making rotor speed
(rotational frequency) adjustments.
Turn off the engine, remove ignition key and
wait until all moving parts have come to a
complete stop.
From the transport position:
- Remove the side guard (1).
- Remove belt guard (2).
To Next Page
Loading...
