KUHN GMD28 - Required Equipment; PTO Shaft; Cutter Bar

5. - Machine specifications
GMD24-GMD28 / HD
33
KN226BGB_A
Disc mower
5.3 Required equipment
The machine is factory fitted with the following
equipment:
5.3.1 PTO shaft
GMD24 / HD:
• 1 3/8’’ - 6 spline pto shaft.
or
GMD24 - GMD28 / HD:
• 1 3/8’’ - 6 spline pto shaft (With free wheel clutch).
or
GMD24 - GMD28 / HD:
• 32 x 38 - 8 spline pto shaft.
5.3.2 Cutter bar
 Knife attachment per bolt and nut
• Standard