KUHN GMD28 - Storage; Dismantling and Scrapping of the Machine

10. - Maintenance and storage
GMD24-GMD28 / HD
77
KN226BGB_A
Disc mower
10.4.3 Storage
• 139884: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 139885: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 139886: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 139888: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134014: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134062: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134063: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134064: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
• 134192: Specific requirements for countries member of the Eurasian Economic Community (EAC
marking).
10.5 Dismantling and scrapping of the
machine
At the end of the machine's life, the various machine components must be disposed of or recycled in
compliance with local regulations in force.
- Make sure the machine is stable (parking stands, holders, slings, etc.) prior to carrying out any repair or
maintenance.
- Before any repair or maintenance on a circuit including an accumulator, depressurize the circuit. Do not
grind or drill on the shell of the hydro-pneumatic accumulator. Always empty and recover the oil of the
machine's gearboxes and the hydraulic circuit to entrust it to waste oil recycling companies.
- Empty fluids or components such as coolant, cooling liquid, brake fluid, batteries, filters and entrust them
to a specialized company.
- Cut the electric power prior to carrying out any repair or maintenance on the circuits or electric/electronic
components. Entrust electronic waste such as control box, wiring harness... of the machine to a
specialized company.
- Separate the metal components, plastic components and rubber components and entrust them to
specialized companies.