KUHN GMD28 - Conformity with Road Regulations

7. - Instructions for transport
GMD24-GMD28 / HD
49
KN226BGB_A
Disc mower
7.2 Conformity with the road
regulations
- Check that the retroreflective signalling equipment
is clean before going on public roads.
- Before driving the machine on public
roads, ensure that the machine complies
with current highway code regulations.
- Replace worn or damaged reflectors.
- Make sure the release cord cannot be
operated inadvertently.
- Make sure that transport lock (1) is fully
engaged.
1
7.3 Machine transport using transport
means
134035: Specific requirements for countries member of the Eurasian Economic Community (EAC marking).
134036: Specific requirements for countries member of the Eurasian Economic Community (EAC marking).