KUHN GMD28 - Preparing the Tractor

GMD24-GMD28 / HD
36
6. - Putting into service
KN226BGB_A
Disc mower
6.2.2 Preparing the tractor
- Select the tractor speed of 540/min.
- The tractor PTO must rotate at a speed of 540/min.
The tractor must be equipped with a single-acting
hydraulic outlet.

Tyre pressure
- Check tyre pressure (Left side = Right side).

Parallelism of lower linkage arms
- Adjust tractor lift rods so that lower linkage arms
are at equal height from ground.
- Check that the tractor's authorized gross
weight as well as its lift capacity and
maximum weight per axle are not
exceeded.
See section:
- Safety / Safety instructions / Precautions
when driving on public roads.
- Appendix.
The tractor must be fitted with lower link
stabilizers.
- Position the machine on level hard ground.
M1
abcd
T
1
T2
M2
A
A