10. - Maintenance and storage
GMD24-GMD28 / HD
67
KN226BGB_A
Disc mower
Checking oil level of the lateral bevel gearbox:
- Place the cutterbar in horizontal position:
• The oil level must reach the lower edge of the
emptying hole.
- Clean and reinstall drain plug (2) and its washer.
- Clean and reinstall filler plug (1) and its washer.
10.3 Maintenance
- Before adjusting, maintaining or repairing
the machine, turn off ignition key and wait
until all moving parts have come to a
complete stop.
10.3.1 Belt tension
- Regularly check belt tension and in
particular during the first hours of use.
- Never replace belts individually.
- Replace belts in full sets.
To Next Page
Loading...
