8. - Instructions for work
GMD24-GMD28 / HD
53
KN226BGB_A
Disc mower
8.3 Machine use
Before the machine engages the crop:
From the working position.
- Engage the tractor PTO and gradually increase
speed until reaching a rated speed of 540 min-1.
During work, only use the tractor lift linkage to place
the machine in headland turn position.
- Check that there is still a play J equalling
minimum 15 mm (0.59’’) between the shell,
the cone rib and the swath wheel.
- Before mowing and to reduce risks of
projections, lower the front guard.
- Keep all persons and animals away from
the machine danger zone.
- Never lean or step on the protection cover.
To Next Page
Loading...
