KUHN GMD28 - Page 68

GMD24-GMD28 / HD
68
10. - Maintenance and storage
KN226BGB_A
Disc mower
 Checking the tension
- Press belt using a force of 3.5 daN (7.9 lbf):
• The belt should not deflect more than H = 10 mm
(0.39’’).

Adjusting the tension
- Unscrew the 2 nuts (1).
- Tighten screw (2) to tension belts.
- Check belt tension.
- Tighten the 2 nuts (1):
• Torque: 13 daNm (96 lbf ft).
H
1
2
1