Kuka IONTEC KR 70 R2100 F - Removing Cover A3

Fig. 9-26: Securing robot arm
9.5.2.2 Removing cover A3
Procedure
1. Unscrew 14 M6x16-8.8-A2K Allen screws from cover A3. Take the
cover off the robot arm.
Fig. 9-27: Cover A3
1 In-line wrist
2 Robot arm
3 M6x16-8.8-A2K Allen screw
KR IONTEC
MA KR IONTEC V4 | Issued: 11.05.2021 www.kuka.com | 267/344
Repair