Getting Started
The Front Panel
1-6
ALPHA WHEEL
In Program and Multi Mode, use the ALPHA WHEEL to navigate through the Program or
Multi list.
In Program Edit or Multi Edit Mode, use the ALPHA WHEEL to scroll through the list of
values for the currently selected parameter. Turn the ALPHA WHEEL counter-clockwise or
clockwise to select the previous or next value. Turn the ALPHA WHEEL slowly to change
the value by one increment, or turn it quickly to jump several increments.
NAVIGATION Buttons
e NAVIGATION buttons move the cursor in the display and allow you to select the
current parameter to be edited.
MODE Buttons
Press the MODE buttons to access PROGRAM, MULTI or GLOBAL Mode. See Modes on
page 1-16 for a description of each Mode.
CATEGORY Buttons
In Program Mode, the CATEGORY buttons allow you to select and browse Programs in 10
categories of instruments. Engaging the KEYPAD button allows you to use the CATEGORY
buttons as an alphanumeric keypad. e KEYPAD button is always on in Multi Mode, and
where needed for editing parameter values.
FAVORITES Buttons
e FAVORITES buttons can be used to instantly recall your favorite Programs and Multis.
To assign the currently selected Program or Multi to a FAVORITES button, press and hold
the desired FAVORITES button for a few seconds until the display indicates that the favorite
has been saved. Press a FAVORITES button to instantly select the stored Program or Multi.
BANK Buttons
e BANK buttons can be used to select dierent banks of favorite Programs and Multis. In
Program and Multi Mode, the currently selected Bank number and name are shown on the
display. To select Bank 1, press both BANK buttons simultaneously.
To Next Page
Loading...
