Kurzweil PC4 SE - FX Page

Multi Edit Mode
FX Page
5-10
FX Page
e FX Page allows you to set Aux send levels for each channel, and enable or disable FX
resources for each channel, which is useful for managing Insert FX resources.
Enable
Use the FX Page to enable or disable the FX of the Program in each Zone. Each Zone can
be set to Y to enable eects, or to N to disable eects. Some Zones set to Y may be displayed
as (Y). is means that there are not enough eects resources available for that Zone, and
that Zone’s eects are not loaded. If you want to use the FX for a Zone displayed as (Y), try
setting other Zones to N to make more FX resources available.
If the Channel number of the current “Aux FX Channel” setting is set to N or (Y), the Aux
Chains will be disabled for all channels.