Kurzweil PC4 SE - Song Mode Transport Controls

Song Mode
Transport Buttons
7-2
Transport Buttons
In Song Mode, the Favorite Buttons below the display can be used to control playback and
recording.
PLAY/PAUSE Button
When the song status is Stopped, press the PLAY/PAUSE button to play the song from the
bar and beat specied by the Locate parameter.
When the Song Status is Rec Ready, press the PLAY/PAUSE button to begin recording.
When the song is status is Playing, press PLAY/PAUSE to pause the playback. Press PLAY/
PAUSE again to continue playing from the same location.
When the song is status is Recording, press PLAY/PAUSE to stop the recording, as if you
had pressed the STOP button.
STOP Button
When the song is status is Playing or Recording, press the STOP button to stop playback or
recording and reset the song’s location to the bar and beat previously specied by the Locate
parameter. If the location previously specied by the Locate is something other than Bar 1,
Beat 1, press STOP twice to reset to 1:1.
When the song is status is Recording, pressing the STOP button will display the “Save
Changes” dialog (see below).
RECORD Button
RECORD: When the Song Status is Stopped, press the RECORD button to change the
Song Status to Rec Ready. When the Song Status is Playing, press the RECORD button to
change the Song Status to Recording.
LOCATE BACK Button
Press the LOCATE BACK button to subtract one Bar from the current value of the Locate
parameter.