Kurzweil PC4 SE - Miscellaneous Page

Multi Edit Mode
Miscellaneous Page
5-8
Miscellaneous Page
e Miscellaneous Page shows various settings for each Zone.
Channel
e Channel parameter determines the MIDI transmit and receive channel for each Zone.
You can set this parameter to any of the 16 MIDI channels (1-16).
You can assign dierent Zones to the same channel, but only one Program can be loaded in a
channel at a particular time. e Program loaded will be whichever program change message
is received last.
Destination
e Destination parameter determines whether MIDI data generated by the keyboard and
physical controllers of each Zone is sent to a PC4 SE Program, through the MIDI Out/USB
ports, or all three. You can set this parameter to any of the eight combinations for the three
destinations for this parameter.
Note that Zone MIDI data is also aected by the Global Mode Destination parameter (see
page 6-10). For example if Global Mode Destination is set to MIDI, and Zone Destination
is set to Local + MIDI, transmission will be limited to MIDI only.