Global Mode
Reset Page
6-28
Reset Page
Use the Reset page to perform a Hard Reset. A Hard Reset restores all Global mode settings
to their factory defaults, and deletes all User objects. Press the ENTER button to perform a
hard reset.
When the hard reset is completed, the PC4 SE will enter System Mode. In System Mode,
select RUN PC4 SE and press ENTER to return to Program Mode.
Caution: Hard Reset will delete all User objects. All User objects that you wish to save
should be saved to an external USB device before doing a Hard Reset, see Store Pages on page
6-22 for details. Factory objects are not deleted.
To Next Page
Loading...
