Kurzweil PC4 SE - FX Page

Program Edit Mode
FX Page
3-4
KB3 Organ FX Chain Parameters
For programs containing KB3 Organ FX Chain Parameters, dierent Value settings can
activate dierent eects. See below for each parameter and the available Value settings.
Chorus/Vibrato Select
Values 0-63 = Vibrato, 64-127 = Chorus.
Chorus/Vibrato Depth
Values 0-42 = Depth 1, 43-85 = Depth 2, 86-127 = Depth 3. Depth 1 has the least amount
of eect applied, Depth 3 has the most.
FX Page
Use the FX page to apply audio eects to a Program. You can select an Insert eects Chain
and 2 Aux eects Chains, all of which apply to all layers in the Program (unless Layer FX are
used, see below for details). In Program Mode, Programs on all MIDI channels share the Aux
chains of the Program on the currently selected MIDI channel.
e PC4 SE’s Chains contain a variety of eects. Each Chain displays icons representing
the type of eects contained in the Chain, as well as the order of eects in the Chain (signal
ows from left to right). e PC4 SE’s Chains include dierent types of reverb, chorus,
delay, anger, phaser, tremolo, panner, rotary, distortion, EQ, compression, lter, envelope
following lter, frequency stimulator, ring modulator, frequency oset, pitch LFO, and
stereoizer.