Multi Edit Mode
Velocity Page
5-5
Velocity Page
LoVel / HiVel
e LoVel and HiVel parameters set the playable velocity range of each Zone by setting the
lowest and highest playable velocity of each Zone. Velocities within this range will trigger a
note for the selected Zone. (You can also set a range where playing velocities will not trigger a
note, by setting Velocity Low to a higher velocity than Velocity High).
ese parameters are useful for “velocity switching”—having a key play dierent sounds
depending on how hard you strike it.
Scale
e Scale parameter lets you amplify or diminish velocity response from -300% to 300%.
Normal response is 100%. Higher values make the keyboard more sensitive (you don’t
need to play as hard to get higher MIDI velocities) while lower values make it less sensitive
(playing harder doesn’t change MIDI velocity as much). You can also set the scale to a
negative number, in which case the velocity response is turned upside-down: playing harder
produces a softer sound and vice versa. is is useful for creating velocity-based crossfades
between zones.
Offset
e Oset parameter changes the velocity response, by adding or subtracting a value to the
played key velocity.
To Next Page
Loading...
