Kurzweil PC4 SE - Save User Multis

Multi Mode
Save User Multis
4-11
Save User Multis
Press the SAVE button to view the Save Dialog, which allows you to save a Split or Layer
Multi as a User Multi, or to save a Multi with its current Zone On/O status. To save the
changed state of Multi controllers which have other assignments, you must set an entry value
for each controller on the Multi Edit Mode Controls Page. See Controls Page on page 5-24
for details.
To save a copy of the Multi, press the SAVE button once to view the Save Dialog. e Save
Dialog allows you to choose an ID number and name for the Multi you are saving. Use the
CHANNEL/PAGE buttons to switch between ID selection and naming pages. On the Multi
Save Page, press the SAVE button again to save the Multi as a User Multi.
Changing ID Numbers
e display shows the rst available ID number and the current Multi name. User Multis can
be saved to ID numbers from 4096 to 8191.
If you are saving a Multi that has not been previously edited, the next available unused ID
number will be selected.
If you are saving a previously edited User Multi, the ID number that the Multi was last saved
with will be selected.
Press the NAVIGATION Left/Right buttons simultaneously to toggle between selecting
the ID number that the Multi was last saved with, or selecting the next available unused ID
number.