Multi Edit Mode
Arpeggiator, CC Seq and Riff Page
5-13
Arpeggiator, CC Seq and Riff Page
Arpeggiator
e Arpeggiator parameters set whether the Arpeggiator is On or O for the Program in
each Zone.
Arpeggiator On/O can also be controlled in each Zone by the front panel ARP button.
In each Multi, the ARP button must be assigned for the desired Zones on the Multi Edit
Controls page. Set Controller to Arp On/O, then select Destination 147 (Arp On/O)
with On Value 127 and O Value 0.
Arpeggiator On/O can also be controlled with other controllers on the Multi Edit Controls
page by using Destination 147 (Arp On/O), or by a switch pedal using one of the Global
Mode SW Override parameters.
To Next Page
Loading...
