Kurzweil PC4 SE - Program Edit Mode Operations; Program Edit Mode Parameters Page

Program Edit Mode
Parameters Page
3-1
Chapter 3
Program Edit Mode
Program Edit Mode allows you to edit and customize Programs. Any Program can be edited
in Program Edit Mode and saved to one of the 4096 User IDs.
To enter Program Edit Mode, rst press the PROGRAM Mode button to enter Program
Mode, then press the EDIT button.
In Program Edit Mode, the top line of the display shows the current page name and number.
Navigate to each page by using the CHANNEL/PAGE buttons.
Navigate to each parameter on the current page by using the NAVIGATION buttons.
Change the value of the selected parameter by using the ALPHA WHEEL, or use the keypad
function of the CATEGORY buttons to type a numeric value followed by pressing the
ENTER button.
Parameters Page
e Parameters page shows all Program and FX parameters for the current program. ese
parameters can be controlled by the PC4 SE’s physical controllers, or by MIDI CCs from an
external MIDI device.
Use the Parameters page to set an initial value for each parameter, and change controller and
MIDI CC assignments.