Kurzweil PC4 SE - Page 45

Program Edit Mode
Parameters Page
3-2
Parameter Column
e Parameter column shows all Program and FX parameters for the current program.
Eect Chain parameters are named with prexes based on their eect type: “INS” for
parameters from Insert eects, “LFX” for parameters from layer eects, and “AUX1” or
“AUX2” for parameters from Aux eects.
To quickly nd a parameter that is already assigned to a controller, select the parameter
column, hold the ENTER button and move a controller to select the assigned parameter.
Control Column
e Control column determines which physical controller (or external MIDI CC number)
will control the parameter in the selected row. To quickly assign one of the PC4 SE’s physical
controllers to a parameter, select the control column in the row of the desired parameter,
hold the ENTER button and move the desired controller. Alternatively, you can use the
ALPHA WHEEL to select a controller from the list, or type in the controller’s MIDI number
followed by the ENTER button. See below for a list of PC4 SE physical controllers and their
associated MIDI numbers.
If you want to disable the controller for a parameter, you can select a value of None by
scrolling to the bottom of the controller list.
To choose an external MIDI CC number as a control source, you can enter the number of
the controller followed by the ENTER button, or use the ALPHA WHEEL. e PC4 SE’s
physical controllers each use one of the available MIDI CC numbers, so you must choose
one of the other available CC numbers when using an external MIDI control source or else
the parameter will also be controlled by a PC4 SE physical controller. MIDI CC numbers
associated with the PC4 SE’s physical controllers are shown in the list below.
PC4 SE Physical Controller MIDI CC Numbers
Mod Wheel (MIDI CC 1) Slider 2 (MIDI CC 25) Sw. Pedal 2b (MIDI CC 67)
Knob 4 (MIDI CC 3) Slider 3 (MIDI CC 26) Switch 1 (MIDI CC 85)
Knob 5 (MIDI CC 9) Slider 4 (MIDI CC 27) Switch 2 (MIDI CC 86)
CC Pedal (MIDI CC 11) Slider 5 (MIDI CC 28) Switch 3 (MIDI CC 87)
Knob 1 (MIDI CC 14) Variation Button (MIDI CC 29) Switch 4 (MIDI CC 89)
Knob 2 (MIDI CC 17) Sw. Pedal 1a (MIDI CC 64) Switch 5 (MIDI CC 90)
Knob 3 (MIDI CC 18) Sw. Pedal 1b (MIDI CC 66)
Slider 1 (MIDI CC 24) Sw. Pedal 2a (MIDI CC 66)