Global Mode
Mixer Pages
6-25
Mixer Pages
e Mixer pages allow you to view and control the current state of the PC4 SE’s 16 MIDI
channels.
Select Mixer page 1 or 2 to view channels 1-8 or 9-16.
Use the Enable parameter to enable or disable the Program on each MIDI channel.
e Prog parameter allows you to view and change the Program number of each Channel.
e Pan and Vol parameters allow you to view and adjust the left right panning (MIDI CC
10) and channel volume (MIDI CC 7) of each Channel.
e lock symbol next to each Prog, Pan and Vol parameter allows you to lock the current
Program, Pan and Volume setting for each channel so that it can not be accidentally changed
by external MIDI messages sent to the PC4 SE when using external MIDI equipment. When
the lock symbol is green, the value is unlocked and can be changed normally. When the lock
symbol is red, the value is locked. Select the lock symbol and use the ALPHA WHEEL to
unlock or lock each parameter.
To Next Page
Loading...
