Program Mode
Save User Programs
2-13
Save User Programs
If you make changes to the current Program using any of the controllers (Knobs, Sliders,
Buttons, Wheels), the SAVE button turns on to indicate that a change has been made to that
Program.
To save a copy of the Program with the changes you’ve made, press the SAVE button once to
view the Save Dialog. e Save Dialog allows you to choose an ID number and name for the
Program you are saving. Use the CHANNEL/PAGE buttons to switch between ID selection
and naming pages. On the Program Save Page, press the SAVE button again to save the
Program as a User Program.
Changing ID Numbers
e display shows the rst available ID number and the current Program name. You can save
Programs with ID numbers from 4096 to 8191.
If you are saving a Program that has not been previously edited, the next available unused ID
number will be selected.
If you are saving a previously edited User Program, the ID number that the Program was last
saved with will be selected.
Press the NAVIGATION Left/Right buttons simultaneously to toggle between selecting the
ID number that the Program was last saved with, or selecting the next available unused ID
number.
To Next Page
Loading...
