Multi Mode
PANIC
4-13
Saving a User Multi
To save a User Multi, select the Multi Save Page and press the SAVE button, (or press the
EXIT button to exit without saving). e display will show a brief message to conrm that
the Multi was saved.
After successfully saving, the Multi will be selected in Multi Mode in the User ID range
(4096-8191). To nd the Multi again later, make sure to press the USER button.
PANIC
Pressing the 0 and ENTER buttons simultaneously performs the PANIC function. PANIC
deactivates all sounding notes and resets controller values by sending an “All Notes O ”
message and a “Reset All Controllers” message on all 16 MIDI channels.
To Next Page
Loading...
