Troubleshooting
Pedal Problems
8-4
Pedal Problems
Switch Pedal Problems
Problem Sustain or Sostenuto pedals are stuck “on”, or functioning
backwards (“on” when up instead of down)
Solution Always plug pedals in before powering on the PC4 SE, and do
not press the pedals before the PC4 SE has powered on. Turn
power off, then on, if necessary.
Problem A switch pedal is not doing the expected function
Solutions Check the Global Mode Main 2 page to see if you have applied
any pedal overrides.
If you have pedal problems in Multi Mode, use the Multi Edit
Mode Controls page to check the pedal settings for each Zone in
each Multi.
Problem A dual switch pedal is not working correctly
Solution A dual switch pedal must be wired as shown below. Any other
wiring pattern will not work correctly.
Sleeve Ring Tip
Left Pedal Right Pedal
To Next Page
Loading...
