Kurzweil PC4 SE - Page 131

Global Mode
Main 1 Page
6-3
their names in parenthesis to indicate that they have not been loaded. Press the ENTER
button to load the currently selected Program or Multi. When switching to Program or Multi
mode, the current Program or Multi will be loaded automatically. When pressing a Favorites
button, the assigned Program or Multi will be loaded automatically.
Multi Controllers
When a multi is selected, this parameter determines how the continuous controllers (knobs,
sliders, wheels, CC pedal) respond to movement. When set to instant, moving a controller
will result in the assigned parameter immediately jumping to the current controller value.
With some parameters an abrupt change to the sound may be undesirable. In this case set
this parameter to Pass Entry Value, the controller will only become active when it is moved
past the controllers Entry value. is results in smooth changes to the sound.
Auto Power Off
e auto power o parameter turns the power saving feature on. When the Auto Power O
parameter is set to On, the PC4 SE will automatically power o after the Power O Time
has expired, from the last key press (physical or MIDI), button press, controller movement,
or USB MIDI activity.
Power Off Time
If the Auto Power O parameter is set to On, then the PC4 SE will power o after the time
selected by the Power O Time parameter has elapsed. e PC4 SE will display a warning
before powering o. Press a key or move any PC4 SE control to dismiss the warning message.
After dismissing this message, the PC4 SE will wait the selected amount of time before
showing this warning again.
FX Mode
When using Program Mode to play a single Program, set FX Mode to Performance. e PC4
SE will minimize disruption of currently loaded Program eects when changing Programs,
and entry values will not disrupt sustained notes when changing Programs in Program Mode.
When using Program Mode to play Programs on multiple MIDI Channels at one time from
an external sequencer, setting FX Mode to Multitrack can help Program eects to remain
loaded consistently on multiple Channels. For more details on multichannel FX in Program
Mode, see “Multichannel FX” on page 2-15.