Global Mode
Main 2 Page
6-9
CC Pedal Overrides
In a similar manner to Switch Pedal Overrides, the CC Override parameters allows the
Continuous Control Pedal assignment to be changed for all Programs and Multis. e
alternative assignments available for the CC Pedal Override include Mod Wheel (MIDI CC
1), Foot/Wah (MIDI CC 4), Volume (MIDI CC7), Expression (MIDI CC11) and Pressure.
In Multi Edit Mode, if a pedal is selected which has a pedal override enabled in Global
mode, a message “Global Pedal Override is enabled” will display when that pedal is viewed to
remind you that the Global mode pedal override settings are being used instead of the Multi
mode pedal settings.
Rotary Override
By default KB3 organ programs have the Slow/Fast speed control for the Rotary speaker
eect assigned to the VARIATION button and the Sustain Pedal (SW1A). e Rotary
Override parameter allows you set the sustain pedal to function as sustain for all KB3
Programs, instead of Rotary Slow/Fast. e VARIATION button will always control the
Rotary speed, regardless of this parameter’s setting.
To Next Page
Loading...
