12. COOLING SYSTEM
12-3
Mongoose/KXR 250
COOLING SYSTEM TESTING
RADIATOR CAP INSPECTION
Install the radiator cap onto the radiator
tester and apply specified pressure to it. It
must hold specified pressure for at least six
seconds.
Radiator Cap Relief Pressure:
0.75~1.05kg/cm²
Install the radiator tester onto the radiator
and apply specified pressure to it. It must
hold specified pressure for at least six
seconds.
Check the water hoses and connectors for
leaks.
The test pressure should not exceed 1.05
kg/cm². Excessive pressure can
damage the radiator and its hose
＊
Apply water to the cap sealing surface
before testing.
＊
Radiator Cap
Radiator Teste
To Next Page
Loading...
