KYMCO Mongoose/KXR 250

14. FRONT WHEEL/FRONT SUSPENSION/
STEERING SYSTEM
14-16
Mongoose/KXR 250
Install the throttle unit by aligning the upper
holder lip with the mark in the handlebar
and then install the lower holder and tighten
the two screws.
STEERING COLUMN
REMOVAL AND INSPECTION
Remove handlebar. (
Ö
14-13)
Remove the two bolts and remove the cable
holder, steering brackets, collars and dust
seal.
Mark
Upper Holder Lip
Bolts
Collars
Steering Bracke
t
Steering Bracke
t
Dust Seal