KYMCO Mongoose/KXR 250

12. COOLING SYSTEM
12-11
Mongoose/KXR 250
THERMOSTAT
THERMOSTAT REMOVAL
Drain the coolant. (
Ö
3-20)
Disconnect the thermosensor wire from the
thermosensor.
Disconnect the water hose from the
thermostat housing.
Disconnect the air vent tube from the
thermostat housing.
Remove the mounting bolt and the
thermostat housing from the cylinder head.
Remove the two screws and separate the
thermostat housing halves.
Remove the thermostat from the thermostat
housing.
Thermosta
t
Bolts
Thermosta
t
Bolts Air Vent Tube
Water Hose
Thermosta
t