KYMCO Mongoose/KXR 250

13. BRAKE SYSTEM
13-18
Mongoose/KXR 250
Fit the O-ring.
Install and tighten the caliper housing bolts.
Torque: 1.8～2.5kgf-m
INSTALLATION
Install the rear caliper and tighten the two
mounting bolts.
With the tube ends contacted to the caliper
and install the washers and tighten the fluid
tube bolts.
Torque: 1.8～2.5kgf-m
Fill the system with brake fluid and bleed
air. (
Ö
13-12)
O-ring
Washers
Washers