Kyocera ECOSYS FS-1035MFP/DP User Manual

8-10
Default Setting (System Menu)
Adding a Custom Size and Media Type for Paper to Print
Set up a frequently-used custom paper size. The custom size options are displayed on the screen to select paper.
The table below lists the sizes that can be registered.
Custom paper sizes can be added for each paper source.
Use the procedure below to select a custom paper size.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Common Settings].
2 Press the OK key. The Common Settings menu appears.
3 Press the U or V key to select [Orig./Paper Set.].
4 Press the OK key. The Orig./Paper Set. menu appears.
5 Press the U or V key to select [Custom PaperSize].
Input units Dimensions
Inch models Cassette: X: 4.13 to 8.50" (in 0.01" increments)
Y: 5.83 to 14.02" (in 0.01" increments)
Paper Feeder
(Option):
X: 5.83 to 8.50" (in 0.01" increments)
Y: 8.27 to 14.02" (in 0.01" increments)
MP Tray: X: 2.75 to 8.50" (in 0.01" increments)
Y: 5.83 to 14.02" (in 0.01" increments)
Metric models Cassette: X: 105 to 216 (in 1 mm increments)
Y: 148 to 356 (in 1 mm increments)
Paper Feeder
(Option):
X: 148 to 216 (in 1 mm increments)
Y: 210 to 356 (in 1 mm increments)
MP Tray: X: 70 to 216 (in 1 mm increments)
Y: 148 to 356 (in 1 mm increments)
Sys. Menu/Count.: a b
3 System
4 User/Job Account
*********************
[ Exit ]
5 Common Settings
Common Settings: a b
*********************
2 Default Screen
3 Sound
[ Exit ]
1 Language
Orig./Paper Set.: a b
*********************
2 Def. Orig. Size
3 Custom PaperSize
[ Exit ]
1 Custom Orig.Size

Kyocera ECOSYS FS-1035MFP/DP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-1035MFP/DP
Category	Printer
Language	English