10
10-17
Troubleshooting
Rear Cover
Follow the steps below to clear paper jams of the rear cover.
1 Open the rear cover and remove the jammed paper by
pulling it out.
CAUTION: The fuser unit inside the machine is hot. Do not
touch it, as it may result in burn injury.
If the paper is jammed inside the fuser unit, open the
fuser cover and remove the paper by pulling it out.
2 Close the rear cover, and open and close the top cover
to clear the error. The machine warms up and resumes
printing.
Document Processor
Follow the steps below to clear paper jams in the document processor.
1 Remove all of the originals from the document feed tray.
2 Open the left cover of the document processor.
To Next Page
Loading...
Need help?
General