10-16
Troubleshooting
3 Remove the drum unit from the machine by holding the
green levers with both hands.
CAUTION: The fuser unit inside the machine is hot. Do not
touch it, as it may result in burn injury.
NOTE: The drum is sensitive to light. Never expose the
drum unit to light for more than five minutes.
4 If the jammed paper appears to be pinched by rollers,
pull it along the normal running direction of the paper.
5 Return the drum unit to its position, aligning the guides at
both ends with the slots in the machine.
6 Insert the developer unit together with the toner
container, back into the machine. Close the front cover.
The machine warms up and resumes printing.
To Next Page
Loading...
Need help?
General