Kyocera ECOSYS FS-1035MFP/DP User Manual

8
8-115
Default Setting (System Menu)
Restarting the System
Restart the printer without turning the power switch off. Use
this to deal with any unstable operation by the machine.
(Same as the computer restart.)
Use the procedure below to restart the system.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [System], and press the OK key.
A login screen will appear. Then, enter the user ID and
password with administrator privileges to log in, and
press [Login] (the Right Select key).
2 The System menu appears.
3 Press the U or V key to select [Restart].
4 Press the OK key. A confirmation screen appears.
5 Press [Yes] (the Left Select key). The printer is
restarted.
If you press [No] (the Right Select key), the printer does
not restart and the screen returns to the System menu.
Sys. Menu/Count.: a b
1 Report
2 Counter
*********************
[ Exit ]
3 System
Login User Name: L b
*******************
Login Password:
[ Login ]
System: a b
*********************
2 I/F Block Set.
3 Security Level
[ Exit ]
1 Network Setting
Restart.
Are you sure?
[ Yes ] [ No ]

Kyocera ECOSYS FS-1035MFP/DP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-1035MFP/DP
Category	Printer
Language	English