Kyocera ECOSYS FS-1035MFP/DP User Manual

8
8-101
Default Setting (System Menu)
4 Press the OK key. Correct. Bk Line appears.
5 Press the U or V key to select [Off], [On(Low)] or
[On(High)].
6 Press the OK key. Completed. is displayed and the
screen returns to the Adjust/Maint. menu.
New Developer
When the printing is too light or incomplete, even though there is enough toner, refresh the developer.
1 In the Sys. Menu/Count. menu, press the U or V key to
select [Adjust/Maint.].
2 Press the OK key. The Adjust/Maint. menu appears.
3 Press the U or V key to select [Service Setting].
4 Press the OK key. The Service Setting menu appears.
5 Press the U or V key to select [New Developer].
6 Press the OK key. A confirmation screen appears.
7 Press [Yes] (the Left Select key). Completed. is
displayed and the screen returns to the Service Setting
menu.
Correct. Bk Line: a b
*********************
2 On(Low)
3 On(High)
1 *Off
Sys. Menu/Count.: a b
: Document Box
; Edit Destination
*********************
[ Exit ]
< Adjust/Maint.
Adjust/Maint.: a b
*********************
2 Send/Box Density
3 Correct. Bk Line
[ Exit ]
1 Copy Denst. Adj.
Service Setting: a b
*********************
2 Network Status
3 New Developer
[ Exit ]
1 Service Status
New Developer.
Are you sure?
[ Yes ] [ No ]

Kyocera ECOSYS FS-1035MFP/DP Specifications

General

Brand	Kyocera
Model	ECOSYS FS-1035MFP/DP
Category	Printer
Language	English