Kyocera ECOSYS FS-1135MFP User Manual

7-20
Status / Job Cancel
If you press [Log] (the Right Select key), the Log menu
appears. From this screen, you can check or print the
transmission/reception history.
NOTE: If you are using a user management function, the
menu for printing the transmission/reception history appears
only when you have logged in as an administrator.
Handling the Devices (USB Memory)
1 Press the Status/Job Cancel key. The Status menu
appears.
2 Press the U or V key to select [USB Memory].
3 Press the OK key. This displays the status of the USB
memory.
Press the Y or Z key to switch the display to other
information items. The items displayed are as follows:
Capacity
Used Area
Free Space
When you press [Remove] (the Left Select key), a
confirmation screen appears and you can remove the
USB memory.
4 Press the OK key. The screen returns to the Status
menu.
Log: a b
*********************
2 Incoming FAX Log
3 Outgoing FAX Rpt
1 Outgoing FAX Log
Status: a b
< Paper Status
= Memory Card
*********************
[ Pause ]
> USB Memory
USB Memory: C b
Capacity: 1/3
512.0MB
[ Remove ]
USB memory can be
safely removed.
[OK ]

Kyocera ECOSYS FS-1135MFP Specifications

General

Print Technology	Laser
Print Resolution	1200 x 1200 dpi
Duplex Printing	Yes
Standard Memory	256 MB
Connectivity	USB 2.0, Ethernet
Scanner Type	Flatbed, ADF
Scan Resolution	600 x 600 dpi
Copier Resolution	600 x 600 dpi
Fax Capability	Yes
Fax Transmission Speed	33.6 kbps
Maximum Paper Size	A4
Operating System Compatibility	Windows, Mac OS, Linux
Dimensions	494 x 430 x 448 mm
Print Speed	35 ppm
Standard Input Capacity	250 sheets
Copy Speed	Up to 35 cpm
Maximum Input Capacity	800 sheets (with optional paper feeders)