FAX Operation (Advanced)
4-38
Using Polling Reception with Sub Addresses
For polling reception, enter the sub address (on this machine, sub address and sub address password) set at the
sending machine. This communication is still possible when the other party is using a third-party machine provided it
is equipped with the same type of sub address communication function.
IMPORTANT: Check the sub address set by the sender beforehand.
1 Press the FAX key.
2 Select the destination. Here, refer to Sub Address
Transmission on page 4-25 when entering the sub
address.
NOTE: Only fax numbers can be selected as destinations.
You can select destinations using a combination of the
numeric keys input and Address Book or One-touch keys
selection.
3 Press the Start key. The operations for reception begin.
To Next Page
Loading...
