Kyocera ECOSYS FS-1135MFP - Operation at the Sending System

Setup and Registration
6-28
Operation at the Sending System
When sending originals by encrypted transmission, use the Address Book registered for encryption or set encrypted
transmission when dialing directly using the numeric keys.
NOTE: Encrypted transmission can be also used in broadcast transmission.
With encryption communication, you cannot conduct sub address communication.
1 Register the encryption key you have arranged with the
receiving system. (Refer to Registering an Encryption
Key on page 6-26.) When an encryption key has already
been registered, go to the next step.
2 Press the FAX key.
3 Place the originals.
4 Use the numeric keys to enter the FAX number of the
other party, and press [Detail] (the Right Select key).
NOTE: When encrypted transmission has been set to a
destination in the Address Book or One-touch keys, you can
use the destination.
5 Press the  or  key to select [Encrypted TX].
6 Press the OK key.
7 Press the  or  key to select [On].
8 Press the OK key.
9 Press the  or  key to select the desired encryption
key number.
10 Press the OK key.
FAX No. Entry: A b
0123456789
*
[ Chain ] [ Detail ]
FAX Detail: C b
Encrypted TX: 2/ 4
Key 02
0000
[ Change ]
Encryption: a b
1 *Off
*********************
2 On
Encryption Key: a b
*********************
2 *Key 02
3 Key 03
1 ----------------